CCNA1 Chapter 2 Exam & Answer
Soal Beserta jawaban Latihan CCNA 1
CHAPTER 2
STMIK Nusa Mandiri Jakarta
1.
What is the function
of the kernel of an operating system?
It
provides a user interface that allows users to request a specific task.
The
kernel links the hardware drivers with the underlying electronics of a
computer.
It
is an application that allows the initial configuration of a Cisco device.
The
kernel provisions hardware resources to meet software requirements.
2.
A network
administrator needs to keep the user ID, password, and session contents private
when establishing remote CLI connectivity with a switch to manage it. Which
access method should be chosen?
Telnet
AUX
SSH
Console
3.
Which procedure is
used to access a Cisco 2960 switch when performing an initial configuration in
a secure environment?
Use
the console port to locally access the switch from a serial or USB interface of
the PC.
Use
Telnet to remotely access the switch through the network.
Use
Secure Shell to remotely access the switch through the network.
Use
the AUX port to locally access the switch from a serial or USB interface of the
PC.
4.
Which command or key
combination allows a user to return to the previous level in the command
hierarchy?
Ctrl-Z
exit
end
Ctrl-C
5.
A router with a valid
operating system contains a configuration file stored in NVRAM. The
configuration file has an enable secret password but no console password. When
the router boots up, which mode will display?
user
EXEC mode
privileged
EXEC mode
global
configuration mode
setup
mode
6.
Which two functions
are provided to users by the context-sensitive help feature of the Cisco IOS
CLI? (Choose two.)
displaying
a list of all available commands within the current mode
selecting
the best command to accomplish a task
determining
which option, keyword, or argument is available for the entered command
allowing
the user to complete the remainder of an abbreviated command with the TAB key
providing
an error message when a wrong command is submitted
7.
Which information does
the show startup-config command display?
the
contents of the saved configuration file in the NVRAM
the
bootstrap program in the ROM
the
IOS image copied into RAM
the
contents of the current running configuration file in the RAM
8.
Why is it important to
configure a hostname on a device?
to
identify the device during remote access (SSH or telnet)
to
allow local access to the device through the console port
a
hostname must be configured before any other parameters
a
Cisco router or switch only begins to operate when its hostname is set
9.
Which two host names
follow the guidelines for naming conventions on Cisco IOS devices? (Choose
two.)
HO
Floor 17
Branch2!
Floor(15)
SwBranch799
RM-3-Switch-2A4
10. How does the service
password-encryption command enhance password security on Cisco routers
and switches?
It
encrypts passwords as they are sent across the network.
It
encrypts passwords that are stored in router or switch configuration files.
It
requires that a user type encrypted passwords to gain console access to a
router or switch.
It
requires encrypted passwords to be used when connecting remotely to a router or
switch with Telnet.
11.
Refer to the exhibit. A network administrator is configuring the
MOTD on switch SW1. What is the purpose of this command?
to
force users of the Admin group to enter a password for authentication
to
configure switch SW1 so that only the users in the Admin group can telnet into
SW1
to
configure switch SW1 so that the message will display when a user enters the enable command
to
display a message when a user accesses the switch
12. While trying to solve
a network issue, a technician made multiple changes to the current router
configuration file. The changes did not solve the problem and were not saved.
What action can the technician take to discard the changes and work with the
file in NVRAM?
Issue
the reload command without saving the running configuration.
Delete
the vlan.dat file and reboot the device.
Close
and reopen the terminal emulation software.
Issue
the copy startup-config running-config command.
13. Which statement is
true about the running configuration file in a Cisco IOS device?
It
is automatically saved when the router reboots.
It
is stored in NVRAM.
It
should be deleted using the erase running-config command.
It
affects the operation of the device immediately when modified.
14. What are two
characteristics of RAM on a Cisco device? (Choose two.)
The
contents of RAM are lost during a power cycle.
RAM
is a component in Cisco switches but not in Cisco routers.
RAM
is able to store multiple versions of IOS and configuration files.
RAM
provides nonvolatile storage.
The
configuration that is actively running on the device is stored in RAM.
15. Which interface allows
remote management of a Layer 2 switch?
the
switch virtual interface
the
first Ethernet port interface
the
AUX interface
the
console port interface
16. Which interface is the
default SVI on a Cisco switch?
VLAN
99
FastEthernet
0/1
VLAN
1
GigabitEthernet
0/1
17. Why would a Layer 2
switch need an IP address?
to
enable the switch to be managed remotely
to
enable the switch to send broadcast frames to attached PCs
to
enable the switch to receive frames from attached PCs
to
enable the switch to function as a default gateway
18. What command can be
used on a Windows PC to see the IP configuration of that computer?
show
interfaces
show
ip interface brief
ping
ipconfig
19. A technician is adding
a new PC to a LAN. After unpacking the components and making all the
connections, the technician starts the PC. After the OS loads, the technician
opens a browser, and verifies that the PC can reach the Internet. Why was the
PC able to connect to the network with no additional configuration?
The
PC came preconfigured with IP addressing information from the factory.
The
PC used DNS to automatically receive IP addressing information from a server.
The
PC was preconfigured to use DHCP.
The
PC virtual interface is compatible with any network.
The
PC does not require any additional information to function on the network.
20. What is a user trying
to determine when issuing a ping 10.1.1.1 command on a PC?
if
the TCP/IP stack is functioning on the PC without putting traffic on the wire
the
path that traffic will take to reach the destination
what
type of device is at the destination
if
there is connectivity with the destination device
21.
The exhibit consists of a topology and a command prompt window
with command output. The topology consists of four PCs connected in pairs to
two switches. PC-A, with the IP address of 192.168.1.10, is connected to switch
1, which has an IP address of 192.168.1.1. PC-B is also connected to switch 1.
PC-B has an IP address of 192.168.1.11. Switch 1 is connected to switch 2.
Switch 2 has an IP address of 192.168.1.2. Connected to switch 2 are PC-C and
PC-D. PC-C has an IP address of 192.168.1.21. PC-D has an IP address of 192.168.1.22.
The command prompt window shows the command ping 192.168.1.2followed by one "Request timed out." message and three "Reply from 192.168.1.2." messages. Below that output, the command ping 192.168.1.21appears. The output from that command is four "Request timed out." messages.
The command prompt window shows the command ping 192.168.1.2followed by one "Request timed out." message and three "Reply from 192.168.1.2." messages. Below that output, the command ping 192.168.1.21appears. The output from that command is four "Request timed out." messages.
Refer to the exhibit. A network technician is testing
connectivity in a new network. Based on the test results shown in the exhibit,
which device does the technician have connectivity with and which device does
the technician not have connectivity with? (Choose two.)
no
connectivity: PC-C
no
connectivity: switch 1
connectivity:
PC-D
connectivity:
PC-B
connectivity:
switch 2
no
connectivity: switch 2
22.
The exhibit show the output from the show ip interface
brief command executed on a switch. The output is as follows:
Switch# show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/1 unassigned YES manual up up
FastEthernet0/2 unassigned YES manual down down
FastEthernet0/3 unassigned YES manual down down
FastEthernet0/5 unassigned YES manual down down
FastEthernet0/6 unassigned YES manual down down
(output omitted)
FastEthernet0/23 unassigned YES manual down down
FastEthernet0/24 unassigned YES manual down down
Vlan1 192.168.11.3 YES manual up up
Refer to the exhibit. What three facts can be determined from
the viewable output of the show ip interface brief command?
(Choose three.)
The
switch can be remotely managed.
Passwords
have been configured on the switch.
One
device is attached to a physical interface.
Two
devices are attached to the switch.
Two
physical interfaces have been configured.
The
default SVI has been configured.
23. Option 4: final mode.
Press spacebar to enter matching mode.
An administrator is configuring a switch console port with a
password. In what order will the administrator travel through the IOS modes of
operation in order to reach the mode in which the configuration commands will
be entered? (Not all options are used.)
interface configuration mode
privileged EXEC mode
second mode
line configuration mode
final mode
global configuration mode
third mode
user EXEC mode
first mode
24. Option 5: aborts
commands such as trace and ping. Press spacebar to enter matching mode.
Match the definitions to their respective CLI hot keys and
shortcuts. (Not all options are used.)
Tab
completes abbreviated commands and parameters
space bar
displays the next screen
Up Arrow
scrolls backwards through previously entered commands
Ctrl-C
?
provides context-sensitive help
Ctrl-Shift-6
aborts commands such
as trace and ping
25. In your opinion (this
has no bearing on your grade), please rate your motivation to do well in this
course:
(1)
Not At All Motivated
(2)
Slightly Motivated
(3)
Motivated
(4) Very Motivated
(5)
Completely Motivated
26. In your opinion (this
has no bearing on your grade), please indicate how enthusiastic you are about
the content of this course and the things you’re learning (or have learned):
(1)
Not At All Enthusiastic
(2) Slightly Enthusiastic
(3) Enthusiastic
(4) Very Enthusiastic
(5) Completely Enthusiastic
27. In your opinion (this
has no bearing on your grade), please indicate your interest in this course:
(1)
Not At All Interested
(2) Slightly Interested
(3) Interested
(4) Very Interested
(5) Completely Interested
Kopas doang gblg, blog ga niat
BalasHapusapasi km sirik aja :*
HapusTerima kasih yaa . . sangat terbantu
BalasHapus